How To Set Comcast Remote With Tv

To Pair an Xfinity Remote (With a Setup Push)

These instructions employ to the following remote models: XR11 (Voice Remote), XR5 and XR2.

Make sure the remote batteries are installed and your TV and TV Box are powered on.
Set the Television receiver input to the input continued to the Xfinity TV Box.
Printing the Setup button on your remote until the LED at the top changes from red to green.
Press the xfinity push button on the remote. The LED will begin flashing green. (Note: When pairing an XR2 or XR5 remote to a DTA, you may need to press the xfinity push up to five times).
Follow the instructions past entering the three-digit, on-screen pairing code.
Once the on-screen pairing lawmaking is correctly entered, your remote is paired with the Telly Box.

Note: If you do not run into on-screen pairing instructions after pressing the xfinity button in step four, press the xfinity push once again. Yous may need to press the xfinity button multiple times if there is more than one TV Box in range.

To Pair an Xfinity Voice Remote (Without a Setup Button)

Note: These instructions apply to the XR15 Vox Remote (X1 or Flex).

Make sure the Vocalization Remote batteries are installed and your TV and TV Box are powered on.
Set the TV input to the input connected to the Xfinity TV Box.
Press and hold the xfinity and Info buttons for five seconds. Wait for the Voice Remote light to alter from cerise to dark-green.
Follow the instructions by entering the 3-digit, on-screen pairing code.
In one case the on-screen pairing code is correctly entered, your Voice Remote is paired with the TV Box.
In one case your Vocalisation Remote is paired, follow the on-screen instructions to ready ability, book and input command for your TV.
- Notation: While the Boob tube is on (TV Box must exist activated first), you lot can also printing and concord the xfinity and Mute buttons on the remote for five seconds until the low-cal at the top changes from ruby-red to green, then follow the on-screen instructions to pair the Voice Remote to command your Goggle box.

These instructions apply to the XR16 Voice Remote (Flex but, no number keys):

Turn on your streaming device and TV.
Remove the pull tab on the dorsum of the remote to activate information technology.
Point the remote at your TV and press the Microphone push button.
Follow the instructions that come up on your Television receiver to finish setting upward.